If Only I Could Get Some TRAXON!

 The Rise Of The AUTO!

traxon gearbox


The ZF TraXon is a highly advanced and efficient modular automatic transmission system that is designed for use in DAF trucks. This gearbox was introduced in 2017 (MY17) and with the introduction of NGD is the only gearbox available.....good bye manual!

It offers a wide range of options and configurations to meet the specific needs of the haulier such as 12 and 16 speed variants with overdrive available as is a wider gear set in the 12 speed for higher toque transmission

The TraXon gearbox also has software that enables precise control over the transmission, including gear shifting, torque distribution, and energy management. This advanced software means the ecu is able to calculate vehicle mass very effectively which consists of inputs of engine speed, torque and vehicle acceleration to ensure the correct drive off gear is selected every time, which allows for even more efficient operation resulting in improved fuel economy and reduced emissions.

traxon gearbox


The TraXon transmission system also features a high maximum torque rating of up to 1,500 Nm, making it able to handle even the most demanding driving conditions with ease. This makes it an ideal choice for use in both mx-11 and mx-13 engines

The TraXon transmission system also offers the option for a fully automatic mode or a manual mode, giving the driver the flexibility to choose the best mode for their specific driving conditions. Additionally, it also offers the option for a start-stop system, which can further improve fuel economy and reduce emissions.

some of the systems that improve driver comfort and improve fuel economy are:

Eco Mode

this function was introduced in 2015, it reduces fuel consumption by introducing a different shift strategy where torque, acceleration and speed are optimised for fuel economy. this of course can be inhibited for a short period of time via the right hand stork button.

eco roll

Eco Roll

another system fitted is EcoRoll, this software shifts the gearbox into neutral when the vehicle is on an incline which allows the vehicle mass to maintain sustained vehicle speed.

Predictive Cruise Control

With technology now utilising GPS it can be used with cruise control to deliver enhanced fuel economy. PCC takes advantage of topographical GPS data to improve cruising speed efficiency. When the vehicle enters particular types of terrain, such as rolling hills, the system regulates the cruising speed to improve performance. For example, as the truck ascends and descends a slope, Dafs Predictive Cruise Control will allow the vehicle speed to decrease slightly below the specified cruise speed. This improves fuel economy since the truck now uses momentum rather than fuel to maintain the predetermined cruise speed.

predictive cruise control


not only does ZF offer the standard software hauliers can opt for more load specific software such as:

  • liquid transport
  • refuse collection
  • off road software (stop&go)

Overall, the ZF TraXon is a highly advanced and efficient modular automatic transmission system that offers DAF trucks exceptional performance, fuel efficiency, and reduced emissions. Its modular design and advanced software make it a versatile and reliable choice for a wide range different haulage applications for Daf.



Comments

Post a Comment

Popular posts from this blog

THe BPV ACTUATOR MYSTERY REVEALED

Image
Let's talk back pressure valves  Following on from my diagnostic and replacement here. We can waffle this week about the BPV or Back Pressure Valve fitted to DAF Mx-11 and mx-13 engines.  Once apon a time we use to have the exhaust brake and it's only job was to create some back pressure on over run.  How things have changed! With the introduction of euro 6 came smart actuators such as the VTG (you can find a bit about that here ) the EGR and the BPV. Now tasked with a multitude of different operations the BPV must now assist the PCI ECU in different operations such as: warming the engine up from cold achieved by creating a lower opening percentage of the butterfly valve. Assist and work in unison in creating backpressure for the EGR valve  Decreasing exhaust gas flow in the EAS system in order to heat up scr and the dpf element Adapt pressure situations in the turbo for better turbine rotor control.  create back pressure for engine braking.  Why is it s
Read more

How Turbos Have Changed

Image
OUT WITH THE OLD TURBO, IN WITH THE NEW TURBO How Turbos Have Changed In this week’s waffle I’m talking about the actuator used on the turbocharger on DAF mx-11 and mx-13 since euro 6 Variable Turbo Geometry plays an important part in efficiency and this was one of the big factors for replacement of the old internal waste gate turbocharger. NO SMOKE WITHOUT POKE We have a few components fitted to the turbocharger to enable correct operation as without a waste gate it can literally produce boost till it fails from oil starvation due to shaft speed or in bits from compressor surge, but in this week’s waffle we will focus on the actuator. One of the major components of the turbo is the VTG actuator. This component controls the direction of air via a nozzle ring at the turbine wheel How this operates is to increase the turbo rpm lower down in the rev range or slow it down higher in the rpm range, such as to control exhaust back pressure during exhaust BRAKE application . But having mechan
Read more

EBS system basics

Image
This week's waffle is all about EBS-3 (Electronically controlled Brake System). Brought in at euro 6 and After a few hiccups with the trailer control valve and EBS ECUs failing (check out this video here for that diagnosis) I'd say the system has been pretty solid.  With our EBS system now having individual modules controlling brake operations connected via CAN to the EBS ECU, a Vehicle Stability Control module (I know it was an option on euro 5!) relaying lateral and vertical information and not to mention and brake equalization between tractor unit and trailer ... I'd say it's come along way in terms of functionality! we will start at the business end and I will try not to Waffle on too much on how this all works as I may as well write a book on it (if only I was using this time to finish my manual on EAS-4!) THE BRAKE SIGNAL ACTUATOR Pressing the foot brake pedal does a few things, a micro switch is operated in the valve allowing the truck to identify a brake event
Read more